FLARING TOOL
  Flaring on tube ends made of steel, stainless steel, copper, etc. up to ½” diameter.
Interchangeable Dies.
  PUMPS
    Handpumps
Capacity : 300 to 8.000 cm3
Pressures up to 700 bar.
Pneumatic pumps
 Pressures up to 700 bar.   
Models of 1500 and 4000 cm3 for reserve tank.
  POWER PUMPS
    Pneumatic electric and internal combustion engine. Different pressures and flow rates. Assembly to order
Pressures up to 700 bar.
  CYLINDERS
    CR single acting cylinders
Return by spring
Capacity  5 up to 100 ton
Stroke 25 up to 260 mm.
CB Cylinders (short) and CC (flat)
 Return by load.
CCR - CBR Cylinders
 Return by spring.
CDH y CRH Cylinders (bolt hole)
 Return by spring or hydraulic  (double acting) Capacity: 12-30-60- 100 and 150 ton.
CDA Cylinders - Doble Acting
 Hydraulic Return Capacity:10-30-50-100-150-200-300 and 500 ton.
  COPPER SHEET CUTTER
    Hydraulic Cutters for copper sheets
Cuts copper sheets of up to 160 mm
in width and thickness of 15 mm.
  CABLE CUTTER
    Cuts copper or aluminium cables
up to 95 mm in diameter  including metal capping.
Weight: 8 kg.
  HYDRAULIC BENDERS
   

Hydraulic benders for copper plates
up to 160 mm. wide, thickness of
10 mm. between centers of 60 mm.

  PRESSURE BOOSTERS
    Pressure Boosters
to move different fluids.
Air-oil and air-water models
Pressures up to 2000 bar.

  HYDRAULIC PUNCHES
    Hydraulic Punches
Drill steel, bronze,copper, stainless steel, brass, alumínum,etc. Diameters of 27 mm and 13 mm thick.
Special Hydraulic Punches
Opportunity for purchasing cheap equipment and expand them for future productive activities.
 HYDRAULIC RIVETING MACHINE
    Riveting by deformation
Union by a metal seal. Replaces with advantages the placement of rivets.
Hydraulic Riveting Machine for placing of rivets
Designed to order for placement of every sort of rivet.
  VALVES
   

High-pressure hydralic valves.

 
  HYDRAULIC RINGS
    Manufactured only to order just for work  on fixing or extraction of parts such as boat  propellers.
  PULLPACK CYLINDERS
    Models from 5 up to 200 ton. with differents strokes. 5 standard models also manufactured under specification.
  LOAD CELLS
    Manufactured to order for measuring loads applied with analog or digital reading. Designs up to 1.000 ton.
 HIDRAUL. CYLINDER WITH THREADED PLUNGER
    Mechanical retention of load.
Manufactured  to order for any stroke and power between 5 and 500 ton.
Power pumps may be used for other applications.
  HYDRAULIC VACUUM TO CLAMP
    For using in counters for testing
and centers of mechanization.
12-20-30-60 and 100 ton/ point
  TELESCOPIC CYLINDERS
   

Manufactured from 5 to 200 ton.
in strokes and heights according to need.
  HYDRAULIC SETS FOR LIFITING
    For large companies of transport, Perform tasks in lifting heavy loads.
Replaces the use of large and expensive gateways.
..SPECIAL DEVICES FOR EXTRATION PROCED.
    Complete equipments for extraction
and placement of pulleys and bearings, etc in the maintenance area.
  RESCUE EQUIPMENT
    Cutting and expansion tool
which operates in conjunction
with the central motor of internal combustion.
  EQUIPMENT FOR PRE-TENSION OF CONCRETE
   

Produced under the specifications.
Do the work of pre-tensioned steel cables and mint in construction.
   TENSION METERS
    Manufactured to order, to measure loads in tension of cables,etc.
Analog or digital readings.
  ROLLERS
   

Transport with casters
capacity 30 - 60 - 100 and 150 ton.
  SPREAD CYLINDERS
    Models from 0,75 to 3,5 ton.used in spaces where they are needed with a small and compact separator. Quick coupling  and return spring.